A planet pinion gear is a small gear mounted on a rotating carrier within a planetary gear set, meshing simultaneously with the sun gear and the internal ring gear so that it revolves around the sun gear while spinning on its own axis, splitting or combining torque to achieve reduction, overdrive, or differential action.
Types of Planet Pinion Gear We Make
- Spur planet pinion — simple to manufacture, lowest cost, no axial load; the default choice for general planetary reducers and travel drives.
- Helical planet pinion — higher contact ratio and load capacity, noticeably quieter running, but generates axial force that must be reacted by thrust washers or a matched helix angle.
- Double-helical / herringbone — axial forces cancel internally, highest torque capacity; used in heavy industrial reducers, mill drives and marine gearboxes.
A planet pinion only performs when the sun gear, the ring gear and the carrier it sits in are built to the same standard. BELON manufactures the pinion as part of the complete planetary set — sun gear, planet gears, internal ring gear and carrier — so the tolerances that decide load sharing are controlled on one shop floor, by one process route, against one drawing package.
Advantages of BELON Planet Pinion Gears
- Process matched to module, not to habit — fine hobbing for small-module pinions, profile grinding for medium and large modules, both consistently reaching DIN 6; 5-axis machining and tooth grinding take precision parts to DIN 4, Ra 0.4.
- Matched-set manufacturing — pinions are produced to the sun gear and ring gear they will actually run with.
- Assembly-level meshing test — the complete set is built at specified centre distance and checked for tooth contact, backlash, smooth rotation, interference and running noise before shipment.
- Carburising grades — 20CrNiMo / AISI 8620 and 8620H for pinions needing a hard case with a tough core, typically 58–62 HRC at the surface.
- Module M0.2 to M45 — across the planetary family — miniature precision pinions through heavy industrial sets.
- Reverse engineering from a worn pinion or sample when no drawing exists.
- Prototype, trial batch, small order and volume production on the same process route.
With rich experience in custom planetary gear manufacturing for more than 15 years, BELON can provide you with precision planet pinion gear as per your application request based on your drawing or sample.






















