Ground bevel gears are bevel gears whose tooth flanks have been finish-ground after heat treatment, so the final tooth form, profile and lead correction are held to tight accuracy grades — typically AGMA 12–13 (DIN 5–6) — instead of being left as-cut.
Why choose BELON as your ground bevel gear supplier
Because the whole chain — cutting, carburizing coordination, finish grinding, matched lapping and final inspection — stays in-house under one drawing revision and one set of records, so nothing falls between vendors when a pattern misses or a set runs noisy. We grind across the real working range (module 0.5–30, AGMA 12–13 / DIN 5–6) rather than being either a precision-only shop or a heavy-duty-only shop, and we review shaft angle, offset, mounting distance and crowning against your housing before quoting. Pairs are lapped and pattern-verified together, and every set ships with inspection certificates, case-depth and hardness records and a measuring-centre report.
Advantages of our ground bevel gears
- Finish-ground after carburizing and quenching, not cut-and-hope
- Straight, spiral, Zerol and hypoid geometries, each ground where the application requires it
- Case-carburizing steels: 20CrMnTi, 20CrMo, 18CrNiMo7-6; through-hardening 42CrMo and 40CrNiMo for larger modules
- Nitriding on request where a hardened-and-ground route is not required by design
- Complete inspection reports available before delivery
- 48-hour technical and commercial response on a complete enquiry
- Reverse engineering from a worn gear sample
This photo showcases a typical example of ground bevel gears made by BELON. It is manufactured from 20CrMnTi and reaches precision of DIN 5. This gear set is used for high precision industrial robots. With rich experience in custom gear manufacturing, BELON is able to provide you with precision ground bevel gears based on your gear drawing or sample.























